| 20G TOWER | |||||
| CAT.# | DEALER | NET | WT. | ||
| 20BG | 3 FOOT TOWER SECTION | $ 189.00 | $ 141.75 | 9 | |
| USE 25G FOR ALL OTHER ACCESSORIES | |||||
| 25G TOWER | |||||
| CAT.# | DEALER | NET | WT. | ||
| 25G | 10 FOOT STRAIGHT SECTION | $ 135.00 | $ 101.25 | 41 | |
| 25G7 | 7 FOOT STRAIGHT SECTION FOR UPS | $ 250.00 | $ 187.50 | 28 | |
| 25AG | 9 FOOT TOP SECTION FOR TV MAST | $ 261.00 | $ 195.75 | 31 | |
| 25AG2 | TOP SECTION 2 1/4X28 TUBE ON TOP | $ 218.00 | $ 163.50 | 31 | |
| 25AG3 | TOP SECTION 2 1/4X12 TUBE ON TOP | $ 275.00 | $ 206.25 | 31 | |
| 25AG4 | 8 FOOT TOP SECTION FLAT PLATE | $ 297.00 | $ 222.75 | 31 | |
| 25TG | 10 FOOT TAPERED BASE SECTION | $ 979.00 | $ 734.25 | 60 | |
| 25ACL3 | 10 FOOT ANTI CLIMB PANELS (3) | $ 397.07 | $ 297.80 | 99 | |
| 25JBK | BOLT KIT, SET OF 6 FOR JOINT | $ 6.50 | $ 4.88 | 0.5 | |
| APL25G | BEACON PLATE | $ 107.00 | $ 80.25 | 14 | |
| SB25G | 3 FOOT SHORT BASE SECTION | $ 83.00 | $ 62.25 | 10 | |
| SB25G5 | 5 FOOT SHORT BASE SECTION | $ 120.00 | $ 90.00 | 19 | |
| SBH25G | 3 FOOT HINGED SHORT BASE SECTION | $ 275.00 | $ 206.25 | 14 | |
| SDB25G | SINGLE DRIVE BASE | $ 290.00 | $ 217.50 | 20 | |
| BPC25G | CONCRETE BASE PLATE | $ 77.96 | $ 58.47 | 27 | |
| 3/4X12PP | PIER PIN | $ 23.00 | $ 17.25 | 1 | |
| BPH25G | HINGED BASE PLATE FOR CONCRETE | $ 320.00 | $ 240.00 | 21 | |
| 1/2X12BB | CONCRETE BOLT-4 NEEDED | $ 19.22 | $ 14.42 | 0.5 | |
| FR25G | FLAT ROOF MOUNT | $ 250.00 | $ 187.50 | 24 | |
| PR25G | PEAK ROOF MOUNT | $ 487.00 | $ 365.25 | 14 | |
| RP25G | ROTOR POST | $ 57.69 | $ 43.27 | 3 | |
| RP25GCM | SPECIAL ROTOR POST | $ 65.00 | $ 48.75 | 2 | |
| AS25G | ACCESSY SHELF DRILLED FOR ROTOR | $ 59.30 | $ 44.48 | 4 | |
| GA25GD | GUY BRACKET ASSEMBLY | $ 185.00 | $ 138.75 | 11 | |
| HB25AG | HOUSE BRACKET 0-15 INCH | $ 166.00 | $ 124.50 | 8 | |
| HB25BG | HOUSE BRACKET 0-24 INCH | $ 152.00 | $ 114.00 | 11 | |
| HB25CG | HOUSE BRACKET 0-36 INCH | $ 181.00 | $ 135.75 | 17 | |
| HBUTVRO | HOUSE BRACKET 25G-55G UNIVERSAL | $ 260.00 | $ 195.00 | 38 | |
| EB2525G | UNIVERSAL EAVE BRACKET | $ 105.00 | $ 78.75 | 7 | |
| TB50 | 1 1/4X2 BUSHING FOR 25AG | $ 11.00 | $ 8.25 | 0.5 | |
| TB3 | THRUST BEARING UP TO 2 INCH OD | $ 179.00 | $ 134.25 | 2.5 | |
| TB4 | THRUST BEARING UP TO 3 INCH OD | $ 237.00 | $ 177.75 | 3 | |
| BAS25G | 20" FLAT TOP W/ACCESSORY SHELF | $ 336.00 | $ 252.00 | 18 | |
| UHF25G | SIDE ARM MOUNT FOR SMALL ANTENNA | $ 37.46 | $ 28.10 | 4 | |
| SA253UA | UNIVERSAL SIDE ARM | $ 183.00 | $ 137.25 | 28 | |
| WP25G | WORK PLATFORM | $ 165.00 | $ 123.75 | 10 | |
| SR245 | SAFETY RING | $ 324.00 | $ 243.00 | 8 | |
| TA25 | TORQUE ARM | $ 393.00 | $ 294.75 | 35 | |
| BPL25G | TOP PLATE FOR TB3 BEARING | $ 212.00 | $ 159.00 | 12 | |
| EF2545 | ALUMINUM ERECTION FIXTURE | $ 1,096.00 | $ 822.00 | 18 | |
| P2545 | POLE ONLY FOR EF2545 | $ 412.00 | $ 309.00 | 10 | |
| H2545 | HEAD ONLY FOR EF2545 | $ 687.00 | $ 515.25 | 8 | |
| M200H | 2" OD X10' 1/8" WALL MAST | $ 234.00 | $ 175.50 | 26 | |
| 25GSSB | SELF SUPPORT BASE PLATE | $ 232.00 | $ 174.00 | 56 | |
| 25GWM | WALL MOUNT FOR 25G | $ 504.00 | $ 378.00 | 95 | |
| $ - | |||||
| $ - | |||||
| 45G TOWER | $ - | ||||
| CAT.# | DLR | #VALUE! | WT. | ||
| 45G | 10 FOOT STRAIGHT SECTION | $ 293.00 | $ 219.75 | 70 | |
| 45AG | 9 FOOT TOP SECTION | $ 351.00 | $ 263.25 | 52 | |
| 45AG2 | TOP SECTION 2 3/8 ODX18"TUBE ON TOP | $ 396.00 | $ 297.00 | 60 | |
| 45AG3 | TOP SECTION 2 1/4 ODX18"TUBE ON TOP | $ 347.00 | $ 260.25 | 60 | |
| 45AG4 | 7 FOOT TOP SECTION FLAT PLATE | $ 416.00 | $ 312.00 | 52 | |
| 45TG | 10 FOOT TAPERED BASE SECTION | $ 1,778.00 | $ 1,333.50 | 90 | |
| ACL455 | 10 FOOT ANTI-CLIMB PANELS (SET OF 3) | $ 624.00 | $ 468.00 | 104 | |
| 45JBK | BOLT KIT, 6 COMPLETE FOR ONE JOINT | $ 13.23 | $ 9.92 | 0.75 | |
| APL45G | BEACON PLATE | $ 257.00 | $ 192.75 | 18 | |
| SB45G | 5 FOOT SHORT BASE | $ 128.00 | $ 96.00 | 35 | |
| BPC45G | CONCRETE BASE PLATE | $ 142.00 | $ 106.50 | 39 | |
| 3/4X12PP | PEIR PIN FOR 45TG | $ 23.00 | $ 17.25 | 1 | |
| FR45G | FLAT ROOF MOUNT | $ 375.00 | $ 281.25 | 34 | |
| AS455G | ACCESSY SHELF DRILLED FOR ROTOR | $ 126.00 | $ 94.50 | 8 | |
| GA45GD | GUY BRACKET ASSEMBLY | $ 211.00 | $ 158.25 | 23 | |
| HBUTVRO | HOUSE BRACKET 25-55G UNIVERSAL | $ 260.00 | $ 195.00 | 15 | |
| TB50 | 1 1/4X1 1/2 OD BUSHING | $ 11.00 | $ 8.25 | 0.5 | |
| TB3 | HEAVY DUTY THRUST BEARING 2" OD | $ 179.00 | $ 134.25 | 2.5 | |
| TB4 | HEAVY DUTY THRUST BEARING 3" OD | $ 237.00 | $ 177.75 | 3 | |
| BPL45G | FLAT TOP PLATE FOR THRUST BEARING | $ 253.00 | $ 189.75 | 30 | |
| SA253UA | UNIVERSAL SIDE ARM | $ 183.00 | $ 137.25 | 28 | |
| TA45 | TORQUE ARM ASSEMBLY | $ 517.00 | $ 387.75 | 56 | |
| DM45G2 | FACE DISH MOUNT 2 3/8" OD X 5' | $ 240.00 | $ 180.00 | 52 | |
| DM454 | FACE DISH MOUNT 4 1/2" OD X 5' | $ 341.00 | $ 255.75 | 88 | |
| WP45G | WORK PLATFORM | $ 179.00 | $ 134.25 | 14 | |
| SR245 | SAFETY RING | $ 324.00 | $ 243.00 | 8 | |
| EF2545 | ALUMINUM ERECTION FIXTURE | $ 1,096.00 | $ 822.00 | 18 | |
| P2545 | POLE ONLY FOR EF2545 | $ 412.00 | $ 309.00 | 10 | |
| H2545 | HEAD ONLY FOR EF2545 | $ 687.00 | $ 515.25 | 8 | |
| M200H | 2 INCH X 10 FOOT 1/8 WALL MAST PIPE | $ 234.00 | $ 175.50 | 26 | |
| $ - | |||||
| $ - | |||||
| 55G TOWER | $ - | ||||
| CAT.# | DLR | #VALUE! | WT. | ||
| 55G | 10 FOOT STRAIGHT SECTION | $ 370.00 | $ 277.50 | 100 | |
| 55TG | 10 FOOT TAPERED BASE SECTION | $ 1,258.00 | $ 943.50 | 138 | |
| ACL455 | 3 ANTI-CLIMB SHEETS (SET OF 3) | $ 624.00 | $ 468.00 | 120 | |
| 55JBK | BOLT KIT, 6 COMPLETE FOR JOINT | $ 15.37 | $ 11.53 | 1 | |
| APL55G | BEACON PLATE | $ 317.00 | $ 237.75 | 20 | |
| SB55G | 5 FOOT SHORT BASE SECTION | $ 197.00 | $ 147.75 | 45 | |
| BPC55G | CONCRETE BASE PLATE | $ 248.00 | $ 186.00 | 40 | |
| 3/4X12PP | PIER PIN FOR BPC55G & 55TG | $ 23.00 | $ 17.25 | 1 | |
| GA55GD | GUY ASSEMBLY | $ 280.00 | $ 210.00 | 28 | |
| BPL55G | TOP PLATE WITH GUY LUGS | $ 654.00 | $ 490.50 | 29 | |
| TB3 | HEAVY DUTY THRUST BEARING 2" OD | $ 179.00 | $ 134.25 | 2.5 | |
| TB4 | HEAVY DUTY THRUST BEARING 3" OD | $ 237.00 | $ 177.75 | 3 | |
| SA253UA | UNIVERSAL SIDE ARM | $ 183.00 | $ 137.25 | 28 | |
| TA55 | TORQUE ARM STABILIZER ASSEMBLY | $ 520.00 | $ 390.00 | 60 | |
| DM55G2 | SIDE FACE DISH MOUNT 2 3/8"ODX5' | $ 240.00 | $ 180.00 | 53 | |
| DM554 | SIDE FACE DISH MOUNT 4 1/2"OD X5' | $ 341.00 | $ 255.75 | 89 | |
| AS455G | ACCESSY SHELF DRILLED FOR ROTOR | $ 126.00 | $ 94.50 | 8 | |
| SR55 | SAFETY RING | $ 865.00 | $ 648.75 | 10 | |
| WP55G | WORK PLATFORM | $ 295.00 | $ 221.25 | 15 | |
| $ - | |||||
| SSV TOWER | $ - | ||||
| STANDARD WELDED SECTIONS | $ - | ||||
| CAT.# | DLR | #VALUE! | WT. | ||
| 1W | 18' STRAIGHT SECTION | $ 647.00 | $ 485.25 | 107 | |
| 1WB | 10' STRAIGHT SECTION | $ 458.00 | $ 343.50 | 63 | |
| 2W | 20' STRAIGHT SECTION | $ 925.00 | $ 693.75 | 153 | |
| 2WB | 10' STRAIGHT SECTION | $ 660.00 | $ 495.00 | 91 | |
| 2WST | 20' STRAIGHT SECTION | $ 842.00 | $ 631.50 | 168 | |
| 3WN | 20' STRAIGHT SECTION | $ 1,231.00 | $ 923.25 | 235 | |
| 3WNB | 10' STRAIGHT SECTION | $ 943.00 | $ 707.25 | 145 | |
| 3WNST | 20' STRAIGHT SECTION | $ 1,273.00 | $ 954.75 | 275 | |
| $ - | |||||
| STANDARD KNOCK DOWN (TAPERED) | $ - | ||||
| 4N | 20' SECTION | $ 2,121.00 | $ 1,590.75 | 470 | |
| 5N | 20' SECTION | $ 2,444.00 | $ 1,833.00 | 580 | |
| 6N | 20' SECTION | $ 1,793.00 | $ 1,344.75 | 515 | |
| 7N | 20' SECTION | $ 2,106.00 | $ 1,579.50 | 675 | |
| 8N | 20' SECTION | $ 2,112.00 | $ 1,584.00 | 720 | |
| 9N | 20' SECTION | $ 2,409.00 | $ 1,806.75 | 770 | |
| 10N | 20' SECTION | $ 2,568.00 | $ 1,926.00 | 870 | |
| 11N | 20' SECTION | $ 4,040.00 | $ 3,030.00 | 455 | |
| 12N | 20' SECTION | $ 4,319.00 | $ 3,239.25 | 1655 | |
| 13N | 20' SECTION | $ 4,183.00 | $ 3,137.25 | 1845 | |
| 14N | 20' SECTION | $ 5,539.00 | $ 4,154.25 | 2560 | |
| 15N | 20' SECTION | $ 7,864.00 | $ 5,898.00 | 3250 | |
| 16N | 20' SECTION | $ 8,855.00 | $ 6,641.25 | 3400 | |
| $ - | |||||
| STANDARD KNOCK DOWN (STRAIGHT) | $ - | ||||
| 4NB | 20' SECTION | $ 1,111.00 | $ 833.25 | 260 | |
| 4NST | 20' SECTION | $ 1,970.00 | $ 1,477.50 | 480 | |
| 5NB | 10' SECTION | $ 1,785.00 | $ 1,338.75 | 315 | |
| 5NST | 20' SECTION | $ 2,800.00 | $ 2,100.00 | 590 | |
| 6NST | 20' SECTION | $ 2,145.00 | $ 1,608.75 | 560 | |
| 7NST | 20' SECTION | $ 2,151.00 | $ 1,613.25 | 635 | |
| 8NST | 20' SECTION | $ 2,459.00 | $ 1,844.25 | 820 | |
| $ - | |||||
| HEAVY DUTY KNOCK DOWN (TAPERED) | $ - | ||||
| 9NH | 20' SECTION | $ 2,635.00 | $ 1,976.25 | 885 | |
| 10NH | 20' SECTION | $ 2,786.00 | $ 2,089.50 | 996 | |
| 12NH | 20' SECTION | $ 4,721.00 | $ 3,540.75 | 1860 | |
| 13NH | 20' SECTION | $ 5,070.00 | $ 3,802.50 | 2110 | |
| 14NH | 20' SECTION | $ 7,225.00 | $ 5,418.75 | 2825 | |
| 15NH | 20' SECTION | $ 8,712.00 | $ 6,534.00 | 3640 | |
| 16NH | 20' SECTION | $10,706.00 | $ 8,029.50 | 3800 | |
| $ - | |||||
| $ - | |||||
| ANCHOR BOLTS FOR STD & HD SECTIONS | $ - | ||||
| 6NABDST | FOR 6N, 7N, 8N, 9N, & 9NH | $ 512.00 | $ 384.00 | 50 | |
| 10NABDST | FOR 10N, & 10NH | $ 633.00 | $ 474.75 | 80 | |
| 11NABDST | FOR 11N, 12N, 12NH, 13N, 13NH | $ 1,100.00 | $ 825.00 | 140 | |
| 15NHABDST | FOR 14N, 15N, 15NH, 16N 16NH | $ 1,980.00 | $ 1,485.00 | 235 | |
| $ - | |||||
| $ - | |||||
| ACCESSORIES FOR STD & HD SECTIONS | $ - | ||||
| TAPERED TOPS | $ - | ||||
| 1TT | FOR SECTIONS 1W, 1WB OR 2W | $ 193.00 | $ 144.75 | 20 | |
| 3TT | FOR SECTIONS 2WB, 2WST OR 3WN | $ 230.00 | $ 172.50 | 20 | |
| 4TTN | FOR SECTIONS 3WNB, 3WNST OR 4N | $ 230.00 | $ 172.50 | 27 | |
| 5TTN | FOR SECTIONS 4NB, 4NST OR 5N | $ 328.00 | $ 246.00 | 34 | |
| 6TT | FOR SECTIONS 5NB, 5NST OR 6N | $ 363.00 | $ 272.25 | 45 | |
| $ - | |||||
| $ - | |||||
| 4 FOOT SHORT BASES | $ - | ||||
| SB2 | FOR SECTION 2W | $ 358.00 | $ 268.50 | 45 | |
| SB3 | FOR SECTION 3WN | $ 358.00 | $ 268.50 | 58 | |
| SB4 | FOR SECTION 4N | $ 561.00 | $ 420.75 | 100 | |
| SB5 | FOR SECTION 5N | $ 691.00 | $ 518.25 | 115 | |
| $ - | |||||
| $ - | |||||
| BEACON AND CAP PLATES | $ - | ||||
| APL1W2WA | FOR SECTIONS 1W OR 2W | $ 229.00 | $ 171.75 | 26 | |
| APL3WNA | FOR SECTION 3WN | $ 165.00 | $ 123.75 | 23 | |
| APL4A | FOR SECTION 4N | $ 132.00 | $ 99.00 | 13 | |
| APL4H4 | FOR SECTION 5N OR 6N | $ 132.00 | $ 99.00 | 15 | |
| APL5A | FOR SECTIONS 7N, 8N, 9N OR 10N | $ 141.00 | $ 105.75 | 15 | |
| APL6A | FOR SECTION 11N | $ 217.00 | $ 162.75 | 16 | |
| APL7A | FOR SECTIONS 12N, 13N OR 14N | $ 138.00 | $ 103.50 | 17 | |
| CP5A | FOR SECTIONS 7N, 8N, 9N OR 10N | $ 66.00 | $ 49.50 | 15 | |
| CP6A | FOR SECTION 11N | $ 116.00 | $ 87.00 | 15 | |
| CP7A | FOR SECTIONS 12N, 13N OR 14N | $ 125.00 | $ 93.75 | 15 | |
| $ - | |||||
| SIDE ARM BRKTS FOR TOP ANT MNT | $ - | ||||
| SAB1W | FOR SECTION 1W | $ 231.00 | $ 173.25 | 15 | |
| SAB2W | FOR SECTION 2W | $ 231.00 | $ 173.25 | 15 | |
| SAB3WN | FOR SECTION 3WN | $ 231.00 | $ 173.25 | 15 | |
| SAB45N | FOR SECTIONS 4N OR 5N | $ 231.00 | $ 173.25 | 15 | |
| $ - | |||||
| $ - | |||||
| TOWER PARTS | $ - | ||||
| CAT.# | DLR | #VALUE! | WT. | ||
| 3/16EHS-500 | 3/16" GUY WIRE-500' | $ 156.00 | $ 117.00 | 34 | |
| 3/16EHS-1000 | 3/16" GUY WIRE-1000' | $ 338.00 | $ 253.50 | 68 | |
| 1/4EHS-500 | 1/4" GUY WIRE-500' | $ 182.00 | $ 136.50 | 60 | |
| 1/4EHS-1000 | 1/2" GUY WIRE-1000' | $ 377.00 | $ 282.75 | 120 | |
| 3/8TBEE | 3/8X6 TURNBUCKLE EYE-EYE | $ 46.00 | $ 34.50 | 1 | |
| 3/8TBEJ | 3/8X6 TURNBUCKLE EYE-JAW | $ 48.01 | $ 36.01 | 1 | |
| 1/2TBEE | 1/2X12 TURNBUCKLE EYE-EYE | $ 86.00 | $ 64.50 | 2 | |
| 1/2TBEJ | 1/2X12 TURNBUCKLE EYE-JAW | $ 91.00 | $ 68.25 | 2 | |
| 1/4CCF | 1/4" CABLE CLAMP | $ 1.70 | $ 1.28 | 12/C | |
| 3/16CCF | 3/16" CABLE CLAMP | $ 1.30 | $ 0.98 | 10/C | |
| 5/8CCF | 5/8" CABLE CLAMP | $ 5.50 | $ 4.13 | 30/C | |
| 1/4TH | 1/4" THIMBLE FOR 3/16EHS | $ 1.20 | $ 0.90 | 5/C | |
| 3/8THH | 3/8" THIMBLE HEAVY DUTY | $ 3.17 | $ 2.38 | 21/C | |
| 5/16THH | 5/16" THIMBLE HEAVY DUTY | $ 1.65 | $ 1.24 | 12/C | |
| GAC3455TOP | ANCHOR ROD | $ 172.00 | $ 129.00 | 25 | |
| GAC303 | 5/8X7' ANCHOR ROD W/3 HOLE PLATE | $ 117.00 | $ 87.75 | 12 | |
| GAC305 | 5/8X7' ANCHOR ROD W/5 HOLE PLATE | $ 112.00 | $ 84.00 | 13 | |
| GAR30 | 5/8X7' ANCHOR ROD ONLY | $ 50.00 | $ 37.50 | 9 | |
| EP25343 | 3 HOLE PLATE FOR TURNBUCKLES | $ 56.87 | $ 42.65 | 3 | |
| EP25345 | 5 HOLE PLATE FOR TURNBUCKLES | $ 70.00 | $ 52.50 | 4 | |
| BG2142 | 3/16" BIG-GRIP AND SLEEVE | $15.05 | $ 11.29 | 28/C | |
| BG2144 | 1/4" BIG-GRIP AND SLEEVE | $ 16.65 | $ 12.49 | 38/C | |
| TRT60 | 5 FOOT TRI-POD | $ 88.00 | $ 66.00 | 12 | |
| TRT36 | 3 FOOT TRI-POD | $ 70.00 | $ 52.50 | 7 | |
| 161005GHS | 1 1/4"ODX10' 16GA GALV MAST | $ 22.48 | $ 16.86 | 9 | |
| 161006PLX | 1 1/2" ODX10' 16GA PLATED MAST | $ 75.00 | $ 56.25 | 10 | |
| GAS604 | 6"X4' EARTH SCREW ANCHOR | $ 80.21 | $ 60.16 | 7 | |
| BGK3G | BASE GROUNDING KIT FOR 25G & 45G | $ 66.00 | $ 49.50 | 10 | |
| AGK1G | ANCHOR GROUNDING KIT | $ 192.00 | $ 144.00 | 30 | |
| D1330 | 42" SIDE ARM | $ 340.00 | $ 255.00 | T | |
| D1130 | 63" SIDE ARM | $ 338.00 | $ 253.50 | 70 | |
| H20 | 20 FOOT PUSH UP | $ 56.35 | $ 42.26 | 15 | |
| H30 | 30 FOOT PUSH UP | $ 90.00 | $ 67.50 | 25 | |
| H40 | 40 FOOT PUSH UP | $ 131.00 | $ 98.25 | 33 | |
| H50 | 50 FOOT PUSH UP | $ 166.00 | $ 124.50 | 43 | |
| 9H50 | 8'3" TELESCOPING MAST FOR UPS | $ 172.00 | $ 129.00 | 40 | |
| 260004P | I BOLT | $ 102.00 | $ 76.50 | ||
| BP4 PLATES | $ - | ||||
| JR51A | U BOLTS FOR AS455G | $ 5.29 | $ 3.97 | ||
| JR45A | U BOLTS FOR AS25G | $ 5.75 | $ 4.31 | ||
| FRMHDWHC1 | FRM MAST HARDWARE PACK | $ 115.00 | $ 86.25 | ||